 |
 |
|
|
 |
|
|
Once the sleek foundation of your bike is determined - your frame; it's time to consider unique custom accessories that
will make your bike a cut above the rest. At Rolling Thunder we put the same quality and precision into our accessories
that we do into our frames. Choose one, choose 'em all - it's your vision. |
26 accessories listed |
|
|
|
 |
|
 |
|
Single Sided Swing Arm - BMotor
This single sided swing arm will fit on any stock B-Motor Harley-Davidson.
Lot Number: 0000045
|
|
 |
|
|
|
Single Sided Swing Arm with Oil & Filter
This single sided swing arm with the oil tank directly in the arm is available for those truly radical customs that just don't have any other room available for the standard oil tank set up. Comes with a pop-up cap and includes oil filter.
Lot Number: 0000044
|
|
 |
|
|
|
Splash Guard Oil Tank
This is a splash guard oil tank which holds 4 quarts of oil designed for drop seat frames and other frame configurations which have limited room for the traditional style oil tank.
Lot Number: 0000043
|
|
 |
|
|
|
Single Sided Swing Arm - Boxed In
Please call for more information.
Lot Number: 0000042
|
|
 |
|
|
|
240mm LSD Conversion Swing Arm
This swing arm just bolts onto your stock OEM frame allowing you to fit a 240mm tire.
Lot Number: 0000041
|
|
 |
|
|
|
300mm RSD Conversion Swing Arm
Another conversion swing arm however, this one is a 300mm RSD which bolts onto your stock OEM frame allowing you to fit a 300mm tire.
Don't forget this is a RSD so you will need a RSD internal transmission kit to make it fit properly.
Lot Number: 0000040
|
|
 |
|
|
|
Single Sided Swing Arm - Tubular
Functional as well as aesthetically pleasing single sided tubular swing arm easily changes the whole look of your bike. Call us for more information.
Lot Number: 0000039
|
|
 |
|
|
|
Rolling Thunder Gas Tank
Manufactured with the same attention to detail as all of our other products, the Rolling Thunder Gas Tank is now available. This tank is specifically designed for the "Sweet Amber" and SLX series frames, however not exclusively. Detailed picture to follow soon. Be sure to call for more information and about the August special promotion.
Lot Number: 0000037
|
|
1200.00
|
|
 |
|
|
|
Internal Gauge Risers
These Rolling Thunder handle bar risers with built-in canisters accept Dakota Digital Speedo and Tachometer. Can be built for any rise and pull-back and will accept any diameter handle bar.
Lot Number: 0000036
|
|
624.00
|
|
 |
|
|
|
Billet Triple Trees
While quantities last, these billet triple trees are ball milled polished aluminium. They come as a complete kit with neck stem and all flush mounting hardware, including internal fork stops and cam lock setup.
Lot Number: 0000035
|
|
175.00
|
|
 |
|
|
|
SLX Slim Fender Struts
Contoured to fit the radius of your fender and can be neatly hidden beneath any seat pan.
Lot Number: 0000034
|
|
180.00
|
|
 |
|
|
|
Drop Seat Fender Struts
Designed for 250 to 330mm modular frames and drop seat models . As with all of our fender struts they are sold separately from the frames and can be purchased chromed.
Lot Number: 0000033
|
|
238.00
|
|
 |
|
|
|
Worth the Wait - The Rolling Thunder Springer
Form and function have been effortlessly combined in Rolling Thunder’s newly engineered Springer. With a unique design and ground-breaking performance abilities – this Springer easily distinguishes itself as the ultimate front-end available on the market.
We know it has been a long wait for this Springer – but this beauty has technology like no other and it will handle as well if not better then most front-ends available on the market. Rolling Thunder stands for quality, precision and care and this Springer embodies every one of those words. You will be astounded by every aspect of the Springer - including the price… give us a call to order yours today!
• Made from “FAT” 2” DOM Steel Tubing
• Powered with Bilstein Gas Charged Shocks
• 100% Tig Welded
• CNC Machined Billet Steel Components
• Triple Plate Chromed
• Smooth Top Trees
• Cam Lock Install System
• Optional Concealed Brake Lines
• Polished Flush Mount Bolts
• Compatible with OEM-style Fenders
Rolling Thunder will build your custom Springer to any length – all you have to do is give us a call and we will send you a work order and ensure your Springer will be a perfect fit to your bike.
Your Bike. Springer by Rolling Thunder.
Check back soon for our online Springer order form...
Lot Number: 0000030
|
|
 |
|
|
|
Fender Struts - Drop Seat Frames
Rolling Thunder has fender struts available for all of its drop seat Softail models. Fender struts are sold separately from the frames and can be purchased chromed. They come in either stock length or with a 2" shorter rise.
Lot Number: 0000024
|
|
 |
|
|
|
Handlebars
Our 1½” diameter, top quality handlebars are built to house 2-5/8” diameter digital gauges and are triple plate chromed or available raw for the visionary in you. The mounting bolts have been machined and drilled through for clean wiring. Components can be purchased individually as bars, grips and spacers , or together as a kit that includes an internal throttle. Dakota Digital gauges are sold separately.
Lot Number: 0000009
|
|
 |
|
|
|
Dakota Digital Gauges
These gauges are designed to fit in Rolling Thunder Handlebars - but can be used for any other compatible application. We supply the Tachometer and Speedometer for our handlebars separately from the standard Handlebar kit.
Lot Number: 0000013
|
|
$299.00 Each
|
|
 |
|
|
|
Internal Throttle Kit
This kit allows the throttle cable to run inside the handlebars, giving a cleaner look to your bike.
Lot Number: 0000010
|
|
$219.00
|
|
 |
|
|
|
Fender Struts
Rolling Thunder has fender struts available for all of its Softail models. Fender struts are sold seprately from the frames and can be purchased chromed. They come in either stock length or with a 2" shorter rise.
Lot Number: 0000023
|
|
 |
|
|
|
Fender Struts - Blind-Hole
Rolling Thunder has blind-hole fender struts available for all of its Softail models. Fender struts are sold seprately from the frames and can be purchased chromed. They come in either stock length or with a 2" shorter rise.
Lot Number: 0000021
|
|
 |
|
|
|
Rigid 200mm Oil Tank
This wrap-around tank is designed to fit in a Rolling Thunder Rigid 200mm frame but it can be used in other frames as well. It comes with a top center fill and is top rubber mounted. Your battery will fit in the standard location. Tank capacity varies by model.
Lot Number: 0000007
|
|
$435.00
|
|
 |
|
|
|
Rigid 230mm - 300mm Oil Tank
This wrap-around tank is designed to fit in Rolling Thunder Rigid frames ranging from 230mm to 300mm but it can be used in other frames as well. It comes with a top center fill and is top rubber mounted. Your battery will fit in the standard location. Tank capacity varies by model.
Lot Number: 0000008
|
|
$435.00
|
|
 |
|
|
|
Stock Replacement Oil Tank
This tank accommodates Fat Boy and Heritage style Harleys (years 1985-1999). It is made with 14-gauge cold roll steel and offset to match the frame on both sides with “wings” for a tight contour fit along the frame.
Lot Number: 0000003
|
|
$350.00
|
|
 |
|
|
|
Internal Fork Stop Plate
An internal fork stop ensures that your front fork won't come into the gas tank. We machine an internal fork stop tab into our hourglass style necks and also supply an internal fork stop plate that allows you to have hidden internal fork stops so you don't compromise the esthetic of your ride. We can send you a replacement plate if you require one.
Lot Number: 0000017
|
|
 |
|
|
|
Hidden Axle Hardware Kit
We supply an Axle with the necessary hardware, including 2 axle washers with tab, 2 axle bolts, and 2 flush mount hidden axle covers with every Rolling Thunder frame that takes a hidden axle. If you require replacement parts just give us a call and we'll send them out to you.
Lot Number: 0000011
|
|
 |
|
|
|
Pivot Tube Hardware
These are the various sizes of Pivot Bolts and Washers that Rolling Thunder supplies with their frames. If you require any of these parts just give us a call and we will make sure we get the right parts out to you.
Lot Number: 0000018
|
|
 |
|
|
|
Sheet Metal Chassis
This unique molded frame will make your next build the easiest it’s ever been. Once you have chosen the specs for your wide tire custom frame, we will fabricate sheet metal to suit your creative needs. These chassis come in two different tank styles: 2-piece flat-side tanks or a one-piece tank. These chassis’ are delivered molded, primed and ready for paint. Whichever of the two kits you choose; you will save time and eliminate fabrication nightmares.
Lot Number: 0000032
|
|
|
|
|